Roland MKB-200 Owner's Manual page 22

IVHILV Neyoudu
TRANSMITTED DATA 25 TRANSMITTED EXCLUSIVE MESSAGE
vevvvve = 1 thru 127 JUNO-106S and HS-60 for tane parameter change.
fO11 nnan 0000 0001 0 Ovev vewy Modulation
vvvvvyy = 0 thru 127 For function, refer to MIDI Implementation of the above
101i nnnn 9109 0000 © g000 D000 Hold OFF instruments
fO1l anna a100 0000 = o1tt ttt Hold ON
10il nnnn Oeee cece Ovvv vewy Control Change #2 Byte Description
1100 nnnn = Oppp pppp Program Change 23 a 1111 0000 Exclusive atatua
1101 nnnn — Ovvy vvvv Channel Pressure b 9100 0001 Roland ID #
1110 anan
Obbh bbbh = Omam aman Pitch Bender
34
¢ 0011 0010 Operation code = Tone parameter change
d 0000 nan Unit @ = MIDT basic channel. annn = 0 thru 16
1012 mann 0111 2011 ©0000 0000 ALL NOTES OFF 35 where nnnn + 1 = channel #
1011 monn 0111 1100 0000 0000 OMNI OFF
e 0000 yyyy Parameter number
a1
1011 nnnn 9111 2101 9000 9000 OMNI ON yyyy = 0 thru 1§
1011 nnnn 0111 1110 9000 9001 MONO ON £ Ozer zeee Value 22
1011 mann = 0111 1311 ©9000 a000 POLY ON zzezazz > 0 thru 127
1111 0000 Exclusive 26 g tii o111 End of Exclusive
1112 0112 End Of Exclusive
Litt 110 Tune Request a7 te Example ts
LVEL 1210 Active Sensing 8 abede fg
FO 41 32 00 03 40 FT
notes : #1 kkkkkkic = 24 thru 106.
Tf TRANSPOSE is at "0", kkkkkkk
36 thru 96, 1 yyyy is set when the "BANK" or "NUMBER" button is pressed
while holding the "FUNC" button down.
*2 ceecces = 0 thru 62 are continuous controllers,
#3 ppppppp = 0 thru 127
*4 Obbbbbbb, Ommmmnma = LSB, MSB af value.
45 When all notes are turned OFF on the MKB-200's keyboard,
ALL NOTES OFF message ia sent.
46 Refer to section 2 TRANSMITTED EXCLUSIVE MESSAGE.
*7 When the "WRITE" button is pressed at "PROGRAM CHANGE" made
or in "PROTECT ON" of memory cartridge at "PATCH CHANGE" mode.
4s When the power ia first applied, following neseages are
tranamitted.
a. OMNI OFF meseage for all channel.
b. Cartridge di Change and Volume data),
Af Memory Cartridge is set.
¢. Program Change(CO 00, C1 00} and Volume data (BO 07
vw, BLO? WWI, if Memory Cartridge is not set,
%s Whon the "KEY MODE" is changed, following mei
transmitted,
a, Notes OFFa for keys that are held down.
b. Damper OFF for previous channel and damper ON for
new channel, if damper pedal is tread.
c, Modulation 00 if its value is not 00, and the value
ig gent for new channel.
d, Pitch Bender Center if its value is not center, and
the value ip sent for new channel.
e. Channel pressure 00 if its vaiue is not 90, and
the value im sent for new channel.
+x When the "Patch Number" is changed, following message are
atted.
a. OMNT OFF message for all channel.
&. Program Change (only in the active channel)
¢. Volume data = (only in the active channel}
¢. Notes OFFs for keys that are held dow
f, Damper OFF for previous channel and damper ON for
new channel, if damper pedal is tread.
&, Modulation 00 tf its value is not 00, and the value
ie sent for new channel.
h. Pitch Bender Center if its value is not center, and
the value ie sent for new channel
i, Channel pressure 00 if its value
the value is sent for new channel.
B not 00, and