Midi Implementation; Thru'ed Data; Control Data Transmission - Roland VE-7000 Owner's Manual

MIDI Implementation

1. THRU'ed data

All data received at MIDI IN will be transmitted from MIDI OUT. This is
called "Thru." The data that is "thru'ed" will be mixed with the output data
of the VE-7000 itself, and sent from MIDI OUT. For this reason, status bytes
that were abbreviated by running status from the data received via MIDI
will be added as necessary.

2. Control data transmission

When you operate the panel buttons, dials, or joystick, the following
exclusive messages will be transmitted.
Status Data bytes
F0H 41H,7FH,00H,36H,12H,adh,adm,adl,dat,sum
Byte Description
F0H Status of System Exclusive Message
41H Manufacturer ID (Roland)
7FH Device ID
00H 36H Model ID (VE-7000)
12H Command ID (DT1)
adh Address MSB
adm Address MID
adl Address LSB
dat Data
sum Checksum
F7H EOX (End of Exclusive)
DEVICE ID
The device ID is used to distinguish between devices, in a way similar to
MIDI channels. On the VE-7000, this is fixed at 7FH. This is the "broadcast"
device ID, and its messages will apply to all connected devices.
MODEL ID
The model ID of the VE-7000 is 00H 36H.
24
Status
F7H