Roland MKB-200 Owner's Manual page 8

Changing the Split Point
@ Hold the Split Button @ down. @ Without releasing the Split Button, press
+. the key for the new split point.
The Display shows the new split point.
Split Point is set to C¥.
currently set.
f t
Split Point Split Point is set to Ca.
| aE
® Release the Split Button.
3) Whole L Mode
In the Whole L mode, MIDI messages are sent
only to the MIDI channel assigned by the Lower
section. To turn to this mode, simply push the
L of the Key Mode Buttons @.
oO 0 @ Oo
ee
OUAL SPLIT) oL u
NI iN]
[2]
Sound Module 1 Sound Module 2
LOWER CH1
MIDI CH 1
MIDI CH 2
UPPER CH2
(Operating)
(Not operating)
4) Whole U Mode
In the Whole U mode, MIDI messages are sent
from the MKB only to the MIDI channel assigned
by the Upper section. To turn to this made, simply
push the U of the Key Mode Buttons @.
o 0 0 &
DUAL SPLIT = L u
IN INI
1 | [2]
Sound Module 1 Sound Module 2
LOWER CH1 MIDI CH 1 MIDI CH 2
UPPER CH2
{Not operating)
(Operating)