Controller - Roland MKB-200 Owner's Manual

h. Controller
The MKB-200 can transmit the Pitch Bender and/
or Modulation messages on two channels at a
time, or only to the channel assinged by the
Upper section.
RENDER: MODULATION
Sa
a=
s
° 8 °
® All Button ® Upper Only Button
@ Depth Knob
okere IS TIME @ Rise Time Knob
@® Bender Lever
1) Bender Lever ®
Bend the Bender Lever to the left or right, and
Pitch Bender message is transmitted. Also,
pushing the lever forward, you can send Mod-
ulation message.
MODULATION
ON
a
BENDER
Push
——_\|_— Bend ——__>
14
2) Rise Time Knob ©
This knob sets the rise time of the modulation.
Longer rise time setting allows smoother
elevation.
3) Depth Knob ®
This knob controls the depth of modulation.
4) All Button ®
Press this button to send the Pitch Bender
and/or Modulation message to both channeis
assigned by the Upper and Lower sections.
ALL
LOWER CH1 MID! CH 1
Yin CH2
Both Modules take on the Pitch
Bender and the Modulation effects.
* At power up, the MKB defaults to All Button On.
5) Upper Only Button ®
Press this button to send the Pitch Bender
and/or Modulation message to only the chan-
nei assigned by the Upper section.
UPPER ONLY
i ae
é 1 XN
{ uF iv iN
A @ | @
MKB LU Sound Moduie 1 Sound Module 2
COWER CHT MIDI CH 7 MIDI CH 2
UPPER CH2 7
Only the Module for Upper section
takes on the Pitch Bender and the
Moduiation effects.
* Adjust the sensitivity of Pitch Bender effect with
the relevant controls on the Sound Modules or
MIDI instruments connected to the MKB.