Other Approvals; Emc And Environmental Type Tests - Siemens SIMATIC NET RUGGEDCOM RS950G Equipment Manual

Certification
6.1.10 Other Approvals
•
•
Declarations of conformity for each directive are available online via
Industry Online Support
6.1.10

Other Approvals

This device meets the requirements of the following additional standards:
•
•
6.2

EMC and Environmental Type Tests

The RUGGEDCOM RS950G has passed the following EMC and environmental tests.
IEC 61850-3 Type Tests
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
30
EU RoHS Directives (EU) 2011/65 and (EU) 2015/863
European Directive for Restriction of Hazardous Substances
China RoHS (relating to SJ/T 11364)
Management Methods for the Restriction of the Use of Hazardous Substances in
Electrical and Electronic Products
[https://support.industry.siemens.com/]>.
IEEE 1613
IEEE Standard Environmental and Testing Requirements for Communications
Networking Devices in Electric Power Substations
IEC 61850-3
Communication Networks and Systems in Substations – Part 3: General
Requirements
Test Description
ESD
Radiated RFI
Burst (Fast
Transient)
Surge
Enclosure
Contact
Enclosure Air
Enclosure Ports
Signal Ports ± 4 kV @ 2.5 kHz
DC Line-to-Line
AC Line-to-Line
Earth
Ground Ports
Signal Ports ± 4 kV Line-to-Ground,
± 2 kV Line-to-Line
DC Line-to-Line ± 2 kV Line-to-Ground,
± 1 kV Line-to-Line
AC Line-to-Line ± 4 kV Line-to-Ground,
± 2 kV Line-to-Line
Siemens
Test Levels
± 8 kV
± 15 kV
20 V/m RUGGEDCOM-
severity levels.
± 4 kV
± 4 kV
± 4 kV
Equipment Manual, 10/2023, C79000-G8976-1037-08
Severity
Levels
4
4
specified
a
Note
4
4
4
4
3
4
RUGGEDCOM RS950G