Summary of Contents for ICP DAS USA XP-9 88-IoT Series
Page 1
XP-9x88-IoT Quick Start v2.2, Jun. 2023 Packing List Apart from this guide, this package includes following items: XP-9188-IoT CF slot with XP-9388-IoT a CF card Screwdriver XP-9788-IoT Resources How to search for drivers, manuals and spec information from ICP DAS website. ...
Page 2
Configure the Boot Mode Before starting the installation, ensure that the rotary switch is set into the “0” position. Connecting to PC, Monitor and Power Supply Insert the I/O Module and Wiring XP-9x88-IoT with 1/3/7 expand slots support high profile I-9K and I-97K series I/O modules. For more information about expansion I/O modules, please refer to our website.
Page 3
Use PAC Utility to Manage the XP-9x88-IoT Double-click the shortcut of “PAC Utility” on the PAC desktop. Double click the “Internet Access” icon on the task bar. Click “Ethernet” and select IPV4. Click on “Properties” button and select “Use the following IP Address”. Key in the IP address, subnet mask, and default gateway.
Page 4
Use DCON Utility Pro to Configure I/O Modules Double-click the shortcut of “DCON Utility Pro” on the desktop. Click the button. Configure the communication settings. Click the button. Click the module name to configure the I/O module.
Page 5
the Language Change Select “Start”, choose “Settings”, click “Control Panel”, and then click Regional Settings. Click “User Interface Language” tab, drop down to select the language, and click OK. Run the PAC Utility, and then reboot the PAC to save all changes.
Version Identification The XP-9x88-IoT can only support latest version of Workbench and Runtime: 11.0 2.xx Ver. • Workbench with Runtime (factory above default) Figure for Version confirmation 11.0 2.xx Workbench Runtime Ver. Note: Win-GRAF runtime must be matched with Win-GRAF Workbench V11 (or later)
Page 7
Download the Latest Win-GRAF Workbench V11 Along with the Runtime win-graf Key in “ ” into Search Box at ICP DAS home page. Find and download Win-GRAF Workbench V11 from the “Software download” Tab.
Page 8
Ethernet Port (Workbench Port) Settings Win-GRAF runtime (2.xx) or above version can set the Ethernet port. 1100 Keep it as default . After setting, click “Set” button and reboot Win- GRAF Runtime to save the changes.