Chamberlain JDC Manual page 40

Programming (continued)
WIRING TYPE DEVICE
Single
Button Wall
Controller
(Wired)
T (continued)
myQ®
Smart
Facility
Access
WIRING TYPE DEVICE ACTION
TS -
This mode will attempt
to close the door from
any position except
when fully closed, or
when a safety input
is present. The stop
button will recycle the
Timer-To-Close (TTC) at
any position. To disable
the TTC in this mode,
installation of a defeat
switch is required (see
wiring diagram).
Momentary contact to
open, close, and stop
with open override and
TTC. Every device that
causes door to open,
Front panel
including a reversing
buttons
device, activates the
(membrane)
TTC. Auxiliary controls
and
can be connected to
3-Button
open input to activate
Wall
the TTC. If the timer
Controller
has been activated, the
open button and radio
control can recycle
the timer. The TTC will
function from the Open
limit and Open mid
stop with this operating
mode type. Close Mid
Stop available but not
shown in table.
Compatible with
3-Button Station,
1-Button Station and 1
and 3-Button Remote
Control.
Monitored Entrapment
Protection (LMEP)
Device required.
ACTION STATE
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Button is Door closing
pressed
Door at Open Mid-Stop
Door stopped during the open cycle Door closes to the CLOSE limit
Door stopped during the close cycle
Button is held
(constant Door opening
pressure)
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Open is
pressed
Door closing
Door at Open Mid-Stop
Door stopped during open or close
cycle
Operator at OPEN limit
Operator at CLOSE limit
Door opening
Close is
Door closing
pressed
Door at Open Mid-Stop
Door stopped during open or close
cycle
STATE
Operator at OPEN limit
Operator at CLOSE limit
Door opening
OPEN
button is
Door closing
pressed
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
CLOSE
Door opening
button is
pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle Door closes to the CLOSE limit
Operator at OPEN limit
Operator at CLOSE limit
STOP
button is Door opening
pressed
Door closing
momentarily
Door at Open Mid-Stop
Door stopped during open or close cycle No change in state (Recycle TTC)
Operator at OPEN limit
Operator at CLOSE limit
OPEN
Door opening
button
is held
Door closing
(constant
pressure)
Door at Open Mid-Stop
Door stopped during open or close cycle
Operator at OPEN limit
Operator at CLOSE limit
CLOSE
Door opening
button
Door closing
is held
Door at Open Mid-Stop
(constant
pressure)
Door stopped during open or close cycle Door closes to the CLOSE limit
RESPONSE
Door closes to the CLOSE limit
Door opens to the OPEN limit or Mid-Stop
Door stops
Door will auto reverse to OPEN limit or Mid-Stop
and activates TTC
Door opens to the OPEN limit and activates TTC
Door opens to the OPEN limit or Mid-Stop and
activates TTC
No change in state
No change in state (Recycle timer)
Door opens to the OPEN limit or Mid-Stop and
activates TTC
No change in state
Door will auto reverse to OPEN limit or Mid-Stop
and activates TTC
Door opens to the OPEN limit and activates TTC
Door opens to the OPEN limit or Mid-Stop and
activates TTC
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
Door closes to the CLOSE limit
40
RESPONSE
No change in state (Recycle TTC)
Door opens to the OPEN limit or Mid-Stop
and activates TTC
No change in state
Door will auto reverse to OPEN limit or Mid-
Stop and activates TTC
Door opens to the OPEN limit and activates
TTC
Door opens to the OPEN limit or Mid-Stop
and activates TTC
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit
No change in state (Recycle TTC)
No change in state
Door stops and activates TTC
Door stops and activates TTC
No change in state (Recycle TTC)
No change in state (Recycle & hold TTC)
Door opens to the OPEN limit (bypasses
Mid-Stop) and activates TTC
No change in state (bypasses Mid-Stop)
and activates TTC
Door will auto reverse to OPEN limit
(bypasses Mid-Stop) and activates TTC
Door opens to the OPEN limit and activates
TTC
Door opens to the OPEN limit (bypasses
Mid-Stop) and activates TTC
Door closes to the CLOSE limit
No change in state
No change in state
No change in state
Door closes to the CLOSE limit