Table of Contents
Advertisement
Intelligent scene selection
(Extracting parts recorded clearly to
play back)
Motion pictures are played back after excepting
some parts that may not have been recorded
clearly such as image shaking or out-of-focus
scenes.
1
Select
(Intelligent scene
selection), then press the cursor
button.
2
Select the scene to be played back,
then press the cursor button.
≥ Select
(All scenes) and press the cursor
button to return to the playback of all scenes.
≥ Select
(By date) and press the cursor
button to activate the Intelligent scene
selection on the selected date. (l 77)
To return to the Intelligent scene selection for
all scenes, select
cursor button and then press the cursor button.
≥ The following motion pictures are skipped
jWhen motion pictures are recorded while
moving the unit quickly
jWhen the unit shakes
jWhen the image contrast is too strong such
as when using backlight
jWhen scenes are too dark
jWhen you record with the unit tilted, upside
down, or pointing down
jWhen the subject is out of focus
≥ Up to 9 sections can be skipped for a single
scene.
≥ When motion pictures are skipped, the image
stops momentarily.
≥ The position of sections to be skipped may
vary depending on the type of recording, with
some having no skipped parts.
78
VQT1T64
(All scenes) with the
≥ Divided scene will not be skipped.
≥ Playing back all the scenes returns if the power
is turned off or the mode dial is operated.
≥ For data that are edited with the easy editing
function of HD Writer 2.6E, the Intelligent
scene selection is disabled.
≥ Deletion of scenes cannot be done during the
Intelligent scene selection.
Repeat playback
Playback of the first scene starts after playback
of the last scene finishes.
Select the menu. (l 29)
[VIDEO SETUP] # [REPEAT PLAY] # [ON]
The [
] indication appears on the thumbnail
and full screen views.
≥ All the scenes on the SD card are played back
repeatedly. (When the play mode is set to
, all the scenes on the selected date are
played back repeatedly.)
≥ Set [REPEAT PLAY] to [OFF] to cancel the
repeat playback function.
Resuming the previous
playback
If playback of a scene was stopped halfway, the
playback can be resumed from where it was
stopped.
Select the menu. (l 29)
[VIDEO SETUP] # [RESUME PLAY] # [ON]
If playback of a motion picture is stopped, [
appears on the thumbnail view of the stopped
scene.
≥ This function's default setting is [ON].
≥ Set [RESUME PLAY] to [OFF] to cancel the
resume playback function.
≥ The memorized resume position is cleared if
you turn off the power or operate the mode
dial.
]
Advertisement
Table of Contents
