Panasonic HDC-SD100PC Operating Instructions Manual page 31

High definition video camera
Hide thumbs Also See for HDC-SD100PC:
Table of Contents

Advertisement

∫ [SETUP]
[CLOCK SET] (l 33)
[DISPLAY]
The screen indications are selected as shown
in the illustration below.
[OFF]
NOV 15 2008
[DATE/TIME] (l 33)
[DATE FORMAT] (l 33)
[POWER SAVE]
[OFF]:
The power saving function is not activated.
[5 MINUTES]:
When about 5 minutes have passed without
any operation, this unit automatically turns off
to save battery life.
≥ The power save function will not activate
when:
jconnected to AC adaptor
jusing the USB for PC, DVD burner, printer
jPRE-REC is used
[QUICK POWER ON] (l 40)
[QUICK START] (l 40)
[BEEP SOUND]
This allows operations such as starting and
ending recording to be signaled by a beep.
1 Beep
When you start recording
When you turn on the power
When this unit is recognized by the PC or the
printer, etc.
2 Beeps
When you pause recording
When you turn off the power
2 Beeps for 4 times
When an error occurs. Check the sentence
displayed on the screen. (l 123)
[ON]
1h30m
R 1h20m
NOV 15 2008
[POWER LCD] (l 35)
[LCD SET] (l 35)
[EVF SET] (l 35)
[COMPONENT OUT] (l 92)
[HDMI RESOLUTION] (l 91)
[VIERA Link] (l 93)
[TV ASPECT] (l 90)
[AV JACK]
Output from the AV/headphone output
terminal can be set to [AV OUT] or
[HEADPHONE].
[AV OUT]:
When AV cable is used
[HEADPHONE]:
When headphone is used
≥ You will hear a buzzing sound when it is set
to [AV OUT] while using a headphone.
[INITIAL SET]
Set to [YES] for changing the menu settings
back to the default condition.
(Settings for [CLOCK SET] and [LANGUAGE]
will not be changed.)
[FORMAT CARD] (l 87)
[DEMO MODE]
This item is used to start the unit
demonstration.
(Only when the mode dial is at the
position)
If [DEMO MODE] is switched [ON] when there
is no SD card inserted, the demonstration
automatically starts. If any operation takes
place, the demonstration is canceled.
However if no operations take place for
approx. 10 minutes, the demonstration
automatically starts again. To stop the
demonstration, set [DEMO MODE] to [OFF] or
insert an SD card.
∫ [LANGUAGE] (l 30)
31
VQT1T64

Advertisement

Table of Contents
loading

This manual is also suitable for:

Hdc-sd100p

Table of Contents