TechniSat TechniStar K2 ISIO Manual page 11

Searching for stations
To search for a station:
> Using the up / down arrow keys, select "All Channels"
if you want to search for all encoded and uncoded channels or "All
Uncoded Channels" if you you want to search for public channels.
> The green function key is used to search
all channels automatically.
Software updates
Once the antenna set-up is complete, the digital receiver checks for all available
updates for the device. Any available updates can be performed automatically.
Channel search / ISIPRO
You have various options for searching for new channels or updating the channel list. You
can use the ISIPRO channel list function to download a new channel list for your receiver
from the satellite or run a channel search.
To download an up-to-date channel list, use the up/down arrow keys to highlight
>
the ISIPRO - service list update item.
To download the available current channel list, use the up/down arrow keys to
>
highlight the ISIPRO - service list update item and start the process by pressing
the OK button.
The current
subsequent
> If you want to run a channel search via satellite instead of updating the channel list,
or if the DVB-S reception signal has not been configured, use the up/down arrow
keys to highlight the All channels or All unencrypted channels field, then
start the channel search process by pressing the OK button.
In this search, all selected satellites in the antenna configuration are automatically
scanned for channels. This procedure may take several minutes. Please take note of
note all messages displayed on the screen.
If the channel search/channel list update has been skipped, the default channel list is loaded.
(where available)
channel list will now be downloade
screen display s and notes.
11
d via satellite. Please observe