Fast Forward/Rewind - TechniSat TechniStar K2 ISIO Manual

9.3.1.2 From playback of a running / existing DVR recording
Press the OK button to open the DVR Navigator.
>
Or
In the function selection select the Movies / DVR item.
>
Now call up the My recordings folder on your attached recording medium.
>
9.3.2 Pause / Freeze frame
To pause playback of a recording (Freeze frame), press the Pause / Play button
>
during playback.
Press the Pause / Play button again to resume playback from the same location.
>

9.3.3 Fast forward/rewind

Your DVR has fast forward and rewind functions so you can get to a specific place in a
recording.
Press the Fast forward or Rewind button during playback.
>
The message Fast forward uu or Rewind tt appears.
The recording will now play in the specified direction at 4x speed.
If you press the Fast forward or Rewind button again, the speed will increase to 16x.
>
The message Fast forward uuu or Rewind ttt appears.
If you press the Fast forward or Rewind button again, the speed will increase to 64x.
>
The message Fast forward uuuu or Rewind tttt appears.
By pressing the Fast forward or Rewind button again you can jump forwards or
>
backwards in 10-minute increments.
> When you get to the place you want in the recording, you can return to normal playing
mode by pressing the Play / Pause button.
9.3.4 Jog shuttle function
To quickly and accurately navigate to a position in the recording, your receiver also has a
'jog shuttle' function. This is used as follows:
During playback press the Jogshuttle button (freeze frame) to access jogshuttle
>
mode.
By pressing the right/left arrow keys (repeatedly if necessary) you can change
>
the speed and direction of the playback.
Press the right arrow key once to play the recording in slow motion. The icon Iu is
>
displayed.
Pressing the up arrow key or the down arrow key causes the next frame
>
forwards or backwards to be shown.
9.3.5 Setting tags
> Skip as described above to a location in the recording where you want to add a tag.
Pressing the Recording button sets a tag at the selected location.
>
Tags can also be set or edited manually or automatically during recording and in the
DVR recordings menu, where this is enabled in automatic programme tagging.
32