Table of Contents
Advertisement
3.
CARD CONFIGURATION
Right click the IP address of the 7780DEC-MP2HD and select "View Configuration". The configuration
page will open; it is from these configuration tabs that the 7780DEC-MP2HD can be configured. Refer
to the relevant section of this manual for an explanation of the features and functions.
3.1.
INPUT SELECT
The input selection tab is used to select the input in use. Both inputs are bypass protected, thus in the
event of the card failing, being removed or the power being cut off, the loop-through for the ASI will
continue. The decoded output will no longer be available.
NOTE: If the card is removed from the chassis, the ASI loop through will continue
but the decoded output will no longer be available.
•
Input Select: The decoder card has two ASI inputs and one IP Input (IP input not currently
available EXP: Q2 2008). Select here the input you require.
Figure 3-1 VistaLINK
®
Revision 1.1
7700 MultiFrame Manual
7780DEC-MP2HD MPEG2 SD/HD Decoder
PRO – Input Select
7780DEC-MP2HD - 13
Advertisement
Table of Contents
