Remove The 8Sff Drive Backplane - Hitachi HA815 G3 Series User Manual

Procedure
1. Back up all server data.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
a. Extend the server from the rack.
b. Remove the server from the rack (Remove the server from the rack).
5. Remove the access panel.
6. Disconnect any cables connected to the PCI riser cage.
7. Remove any expansion boards.
8. Remove the PCI riser cage.

Remove the 8SFF drive backplane

Procedure
1. Back up all server data.
2. Power down the server.
3. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
4. Do one of the following:
Operations 36