Table of Contents
Advertisement
5.7.3.3 Upgrade
1. Copy the firmware file (.sw file) to your USB drive, and insert the USB flash drive into the NVR's USB
port.
2. Click the Select File button to choose the firmware file in your USB flash drive, then Click OK.
3. Click
Upgrade
button to start a system upgrade. The system upgrade will last 5-10 minutes, please do
NOT
power off the NVR or remove the USB from NVR during firmware upgrade.
5.7.3.4 Parameter Management
You can export the main menu settings you have configured to a USB flash drive, or import an
exported setting file from USB flash drive to the NVR.
Save
Settings: Click to save the NVR current system settings to the USB device. You will be required to
input the Admin password to authenticate.
Load
Settings: Once you have created a system settings export, you can import the settings on to
another NVR. Click
Load Settings
from your USB flash driver. You will be required to input the Admin password to authenticate.
button to navigate to the system settings file you want to import
99
USER MANUAL
Advertisement
Table of Contents
