USER MANUAL
Chapter 2 NVR Installation & Connection
2.1 HDD Installation
This NVR supports two 3.5" or 2.5" SATA hard disk drives.
CAUTION :
DO NOT install or remove the hard disk drive while the device power is
turned ON
HDD Installation:
b) Carefully flip the NVR case and secure the hard disk drives
a) Connect the data and power cables to the two hard disk
to the NVR with the eight (8) screws
drives and place the hard disk drives on the NVR case.
Note: Above procedures are for reference only. Your unit already has the Hard Drive installed and
removing or changing the hard drive without prior approval from Speco Technologies will void your
warranty.
3