Table of Contents
Advertisement
This mainboard uses AMI BIOS that enables users to config-
BIOS
ure many system features including the following:
Firmware
•
•
•
•
The firmware can also be used to set parameters for different
processor clock speeds.
•
Built-in
•
Ethernet LAN
(optional)
•
•
C
h
o
o
s
i
n
g
a
C
o
m
C
h
o
o
s
i
n
g
a
C
o
m
There are many types of computer cases on the market. The mainboard com-
plies with the specifications for the ATX system case. Some features on the
mainboard are implemented by cabling connectors on the mainboard to indi-
cators and switches on the system case. Ensure that your case supports all
the features required. The mainboard can support one or two floppy diskette
drives and four enhanced IDE drives. Ensure that your case has sufficient
power and space for all the drives that you intend to install.
Most cases have a choice of I/O templates in the rear panel. Make sure that
the I/O template in the case matches the I/O ports installed on the rear edge
of the mainboard.
This mainboard has an ATX form factor of 305 x 244 mm. Choose a case that
accommodates this form factor.
Power management
Wake-up alarms
CPU parameters and memory timing
CPU and memory timing
Built-in 10BaseT/100BaseTX Ethernet LAN
VT8233 integrates Fast Ethernet MAC and VT6013 LAN
PHY in compliance with IEEE802.3u 100BASE-TX,
10BASE-T and ANSI X3.263 TP-PMD standards
In compliance with ACPI 1.0 and the Network Device
Class Power Management 1.0
High Performance achieved by 100Mbps clock generator
and data recovery circuit for 100Mbps receiver
p
u
t
e
r
C
a
s
e
p
u
t
e
r
C
a
s
e
3
Advertisement
Table of Contents
