Advanced Bios Features Page - PCchips M786 Series User Manual

Mainboard User's Manual

Advanced BIOS Features Page

Use this page to set more advanced information about your system.
Take some care with this page. Making changes can affect the
operation of your computer.
CMOS Setup Utility – Copyright (C) 1984 – 2001 Award Software
Trend ChipAway Virus
CPU Internal Cache
External Cache
CPU L2 Cache ECC Checking
Processor Number Feature
Quick Power On Self Test
First Boot Device
Second Boot Device
Third Boot Device
Boot Other Device
Swap Floppy Drive
Boot Up Floppy Seek
Boot Up NumLock Status
Gate A20 Option
Typematic Rate Setting
x Typematic Rate (Chars/Sec)
x Typematic Delay (Msec)
Security Option
OS Select For DRAM > 64MB
    : Move
Enter : Select
F1:General Help
Defaults F7:Optimized Defaults
Trend ChipAway This mainboard has built-in virus protection in the
firmware. Use this item to enable or disable the
Virus
built-in virus protection.
CPU Internal
All the processors that can be installed in this
mainboard use internal (level 1) cache memory to
Cache
improve performance. Leave this item at the default
value Enabled for better performance.
External Cache
Most processors that can be installed in this system
use external (L2) cache memory to improve
performance. The exceptions are older SEPP
Celeron CPUs running at 266 or 300 MHz. Enable
this item for all but these two processors.
CPU L2 Cache This item enables or disables ECC (Error Correction
Code) error checking on the CPU cache memory.
ECC Checking
We recommend that you leave this item at the
default value.
24
Advanced BIOS Features
Enabled
Enabled
Enabled
Enabled
Enabled
Enabled
HDD-0
Floppy
CDROM
Enabled
Disabled
Disabled
On
Normal
Disabled
6
250
Setup
Non-OS2
+/-/PU/PD:Value: F10: Save
F5:Previous Values
Item Help
Menu Level
Allows you to choose
the VIRUS warning
feature for IDE Hard
Disk boot sector
protection. If this
function is enabled
and someone attempts
to write data into this
area, BIOS will show a
warning message on
screen and alarm beep
ESC: Exit
F6:Fail-Safe