Keeping The Appliance Clean; Rails; Detaching And Refitting The Rails - Siemens CM678G4 6B Series Instruction Manual

Table of Contents

Advertisement

en

Rails

Accessories
Hot soapy water:
Soak and clean with a dish cloth or brush.
If there are heavy deposits of dirt, use a stainless
steel scouring pad.
Meat thermome-
Hot soapy water:
ter
Clean with a dish cloth or a brush.
Do not clean in the dishwasher.
--------
Notes
Slight differences in colour on the front of the
appliance are caused by the use of different
materials, such as glass, plastic and metal.
Shadows on the door panels, which look like
streaks, are caused by reflections made by the
interior lighting.
Enamel is baked on at very high temperatures.This
can cause some slight colour variation. This is
normal and does not affect operation.
The edges of thin trays cannot be completely
enamelled. As a result, these edges can be rough.
This does not impair the anti-corrosion protection.

Keeping the appliance clean

Always keep the appliance clean and remove dirt
immediately so that stubborn deposits of dirt do not
build up.
:
Warning – Risk of fire!
Loose food remnants, fat and meat juices may catch
fire. Before using the appliance, remove the worst of the
food remnants from the cooking compartment, heating
elements and accessories.
Tips
Clean the cooking compartment after each use. This
will ensure that dirt cannot be baked on.
Always remove flecks of limescale, grease, starch
and albumin (e.g. egg white) immediately.
Use the universal pan for baking very moist cakes.
Use suitable ovenware for roasting, e.g. a roasting
dish.
28
pRails
W ith good care and cleaning, your appliance will retain
R a i l s
its appearance and remain fully functional for a long
time to come. This will tell you how to remove the
shelves and clean them.

Detaching and refitting the rails

:
Warning – Risk of burns!
The rails become very hot. Never touch the hot rails.
Always allow the appliance to cool down. Keep children
away from the appliance.
Detaching the rails
Pull out the pull-out forwards.
1.
Push the front rail forwards and up (fig.
2.
detach it (fig.
).
"
Then swing the entire rail outwards
3.
ƒ
at the rear
(fig.
).
#
Clean the rails with cleaning agent and a sponge. For
stubborn deposits of dirt, use a brush.
) and
!
and detach it

Advertisement

Table of Contents
loading

Table of Contents