Keeping The Appliance Clean - Siemens HM676GB 1 Series Instruction Manual

Hide thumbs

Table Of Contents

Table of Contents

Area

Cleaning

Appliance exterior

Stainless steel

Hot soapy water:

front

Clean with a dish cloth and then dry with a soft

cloth.

Remove flecks of limescale, grease, starch and

albumin (e.g. egg white) immediately. Corrosion

can form under such flecks.

Special stainless steel cleaning products suitable

for hot surfaces are available from our after-sales

service or from specialist retailers. Apply a very

thin layer of the cleaning product with a soft cloth.

Plastic

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use glass cleaner or a glass scraper.

Painted surfaces

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Control panel

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use glass cleaner or a glass scraper.

Door panels

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

Do not use a glass scraper or a stainless steel

scouring pad.

Door handle

Hot soapy water:

Clean with a dish cloth and then dry with a soft

cloth.

If descaler comes into contact with the door han-

dle, wipe it off immediately. Otherwise, any stains

will not be able to be removed.

Appliance interior

Enamelled sur-

Hot soapy water or a vinegar solution:

faces

Clean with a dish cloth and then dry with a soft

cloth.

Soften baked-on food remnants with a damp cloth

and soapy water. Use stainless steel wire wool or

oven cleaner to remove stubborn dirt.

Caution!

Never use oven cleaner in the cooking compart-

ment when it is still warm. This may damage the

enamel. Remove all food remnants from the cook-

ing compartment and the appliance door before

you next heat up the appliance.

Leave the cooking compartment open to dry after

cleaning it.

It is best to use the cleaning function.

~ "Cleaning function" on page 21

Note:

Food residues can cause white deposits to

form. These are harmless and do not affect how

the appliance works.

Remove using lemon juice if required.

Glass cover for

Hot soapy water:

the interior light-

Clean with a dish cloth and then dry with a soft

ing

cloth.

If the cooking compartment is heavily soiled, use

oven cleaner.

Door cover

made from stainless steel:

Use stainless steel cleaner. Follow the manufac-

turers' instructions. Do not use stainless steel

care products.

made from plastic:

Clean using hot soapy water and a dish cloth. Dry

with a soft cloth. Do not use glass cleaner or a

glass scraper.

Remove the door cover for cleaning.

Stainless steel

Stainless steel cleaner:

interior door

Observe the manufacturer's instructions.

frame

This can be used to remove discolouration.

Do not use stainless steel care products.

Rails

Hot soapy water:

Soak and clean with a dish cloth or brush.

Pull-out system

Hot soapy water:

Clean with a dish cloth or a brush.

Do not remove the lubricant while the pull-out rails

are pulled out – it is best to clean them when they

are pushed in. Do not clean in the dishwasher.

Accessories

Hot soapy water:

Soak and clean with a dish cloth or brush.

If there are heavy deposits of dirt, use a stainless

steel scouring pad.

--------

Notes

Slight differences in colour on the front of the

■

appliance are caused by the use of different

materials, such as glass, plastic and metal.

Shadows on the door panels, which look like

■

streaks, are caused by reflections made by the

interior lighting.

Enamel is baked on at very high temperatures.This

■

can cause some slight colour variation. This is

normal and does not affect operation.

The edges of thin trays cannot be completely

enamelled. As a result, these edges can be rough.

This does not impair the anti-corrosion protection.