Table of Contents
Advertisement
Inserting the holders
If the holders fall out when you remove the rails, these
must be re-inserted.
The holders at the front differ from those at the rear
1.
(fig.
).
!
Use the hook to mount the front holder at the top
2.
‚
into the round hole
it at the bottom, and straighten it
Use the hook to attach the rear holder into the upper
3.
‚
hole
and push it into the lower hole
Attaching the rails
When hanging the rails, ensure that the pull-out is at the
bottom.
The rails only fit on the right or the left side. The pull-out
rails must pull out forwards.
Hold the rear of the frame at an angle and mount it
1.
at the top and bottom
Pull the rail forwards (fig.
2.
, set it at a slight incline, attach
ƒ
(fig.
).
"
ƒ
(fig.
‚
(fig.
).
!
).
"
Then fold it forwards and insert it (fig.
3.
And push it downwards (fig.
4.
Completely reinsert the pull-outs.
5.
).
#
Rails
en
).
#
).
$
29
Advertisement
Table of Contents
