Load Bios Defaults - Asus P3/370A User Manual

3.7.6 Init Display First
Select "AGP" or "PCI Slot" for system to detect first when boot-up.
3.7.7 Onboard FDC Controller
Select "Enabled" to activate the on-board FDC
Select "Disabled" to activate an add-on FDC
3.7.8 Onboard Serial Port 1 & 2
Select an address and corresponding interrupt for the first/second serial
port. The default value for the first serial port is "3F8/IRQ4" and the
second serial port is "2F8/IRQ3".
3.7.9 UR1 & 2 Mode Select
Select to activate the Infrared transfer function.
3.7.10 Onboard Parallel Port
Select address and interrupt for the Parallel port.
3.7.11 Parallel Port Mode
Select an operating mode for the parallel port. Mode options are SPP,
EPP1.7, EPP1.9, ECP and ECPEPP1.7, ECPEPP1.9.
3.7.12 ECP Mode Use DMA
Select a DMA channel if parallel port is set as ECP1.7, ECP1.9,
ECPEPP1.7 or ECPEPP1.9.

3.8 Load BIOS Defaults

41