Load Bios Defaults; Load Setup Defaults - Asus PCI/I-P54SP4 User Manual

PCI/I-P54SP4
User's Manual
Load BIOS Defaults
"LOAD BIOS DEFAULTS" loads the troubleshooting default
values permanently recorded in the BIOS ROM. These settings are
non-optimal and tum off all high performance features.
The Standard CMOS Setup screen is not affected. To use this fea-
ture, highlight it on the main screen and press <Enter>. A line will
appear asking if you want to load the BIOS default values. Press the
<Y> key and then <Enter>. The defau lt settings will load. Press <N>
if you don't want to proceed.
Load BIOS Defaults Screen
ROM PCI / I SA BIOS(P / I-54SP4 )
CMOS SETUP UTILITY
AW ARD SOFTWARE,INC.
STANDARD CMOS SETUP
SUPERVI SOR PASSWORD
BIOS FEATURES SETUP
USER PASSWORD
CHIPSET FEATURES SETUP IDE HOD AUTO DETECTI ON
POWER HANAGEMENT SETUP
SAVE & EXIT SETUP
PCI ｃ ｏ ｎ ｆ ｉ ｇ ｕ ｒ ａ ｔ ｉ ｏ ｾ ＠ SAVING
LOAD B IOS DBPAUL'l Load BIOS Defa ul t a (Y/N)? N
LOAD SETUP DEPAUl
ESC
:
Quit
iJ.-H-
: Select Item
FlO
:
Save & Exit Setup (SHIFT) F2 Change Co l o r
Load BIOS Defaults exc ep t S t a n dard CM OS SETUP
• • •• • • ••• •••• ••• • • •• • • •• •• •• • •• •• • • ••• • • •
3- 22
Software Guide
l oad Setup Defaults
The "LOAD SETUP DEFAULTS" option loads optimized set-
tings from the BIOS ROM. Use this option to load default settings for
normal use.
The Setup Defaults default settings do not affect the Standard
CMOS Setup screen. To use the Setup Defaults, highlight the entry
on the main screen and press <Enter>. A line will appear asking if
you want to load the Setup default values. Press the <Y> key and then
press <Enter>. The Setup Defaults will load. Press <N> if you don't
want to proceed.
Load Setup Defaults Screen
ROM PCIIISA BIOS ( P / I-54SP4)
CMOS SETUP UTILITY
AW ARD SOFTWARE , INC .
STANDARD CMOS SETUP
SUPERVISOR PASSWORD
BIOS FEATURES SETUP USER PASSWORD
CHIPSET FEATURES SETUP IDE HOD AUTO DETECTI ON
POWER MANAGEMENT SETUP
SAVE
&
EXIT SETUP
PCI
ｃ ｏ ｎ ｆ ｉ ｇ ｕ ｒ ａ ｔ ｉ ｏ ｾ ＠ SAVING
.LOAD BIOS DEPAUW Load SRTUP Defaults
(Y/N)? N
LOAD SE TUP DEPAUl
I
ESC
: Quit
iJ.-H-:
Se l e c t Item
FlO
:
Sav e & Exit Setup (SHIFT ) F2
: Change Col o r
Lo ad SETUP Defaults except S tandard CMOS S ETUP
• • • •• ••• ••• • • • •• • •• • •••••• •••• ••••••••••••
3-23