PageUp> or <PageDown > key to change hard drive type. Incorrect
setting may result in boot up error or system hang.
If your hard disk drive is not listed, you can select Type "USER" to
define your own drive manually. We recommend that you select Type
"AUTO" for all drives. The BIOS will auto-detect the hard disk drive
and CD-ROM drive at the POST stage.
If your hard disk drive is a SCSI device, please select "None" for your
hard drive setting.
3.2.4 Floppy Drives A&B Setting
Select your floppy disk drive type. Options are 360KB (5.25"), 720KB
(3.5"), 1.2MB (5.25"), 1.44MB (3.5), 2.88MB (3.5").
3.2.5 Floppy 3 Mode Support
This is required to support older Japanese floppy drives. Floppy 3 Mode
support will allow reading and writing of 1.2MB (as opposed to
1.44MB) on a 3.5-inch diskette.
3.2.6 Video Display Adapter Setting
Select the display adapter type for your system. Options are EGA/VGA,
MONO, CGA40 and CGA80.
3.2.7 Halt On
This function allows the system to halt when an error is detected during
Power-On Self-Test.
3.3 BIOS Features Setup
The sub-menu (Figure 3-3) includes all AWARD enhanced functions. The
correct setting can enhance boot up efficiency. You can assign system speed,
setup sequence, typematic and system password setting. You can enter <F1
25