Load Bios Defaults; Load Setup Defaults - Asus XG-DLS User Manual

Dual xeon atx motherboard

Hide thumbs Also See for XG-DLS:

Table of Contents

IV. BIOS SOFTWARE

Load BIOS Defaults

The "Load BIOS Defaults" option allows you to load the troubleshooting default

values permanently stored in the BIOS ROM. These default settings are non-opti-

mal and disable all high performance features. To load these default settings, high-

light "Load BIOS Defaults" on the main screen and then press <Enter>. The system

displays a confirmation message on the screen. Press <Y> and then <Enter> to

confirm. Press <N> and then <Enter> to abort. This feature does not affect the

fields on the Standard CMOS Setup screen.

The "Load Setup Defaults" option allows you to load the default values to the sys-

tem configuration fields. These default values are the optimized configuration set-

tings for the system. To load these default values, highlight "Load Setup Defaults"

on the main screen and then press <Enter>. The system displays a confirmation

message on the screen. Press <Y> and then <Enter> to confirm. Press <N> and

then <Enter> to abort. This feature does not affect the fields on the Standard CMOS

Setup screen.

Supervisor Password and User Password

These two options set the system passwords. "Supervisor Password" sets a pass-

word that will be used to protect the system and the Setup utility; "User Password"

sets a password that will be used exclusively on the system. By default, the system

comes without any passwords. To specify a password, highlight the type you want

and then press <Enter>. A password prompt appears on the screen. Taking note that

the password is case sensitive, and can be up to 8 alphanumeric characters long, type

in your password and then press <Enter>. The system confirms your password by

asking you to type it again. After setting a password, the screen automatically re-

verts to the main screen.

ASUS XG-DLS User's Manual

Table of Contents