Table of Contents
Advertisement
*Important: If the remote control POWER, ACTION, PROG, CHAY, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCH button on the remote and try the button again.
Setup inctudes the following:
* Choose the language for on-screen menus
1
and messages.
Turn the TV and VCR on.*
* Tell the VCR how your equipment is hooked up
(pages 6-9) so the VCR can correctly place
channels into memory.
2 Tune
:
your TV to the VCR output channel (the same
Set ev roreddy IOF Cek seh
one you set on the back of the VCR: CH3 or CH4).
* If you used audio/video jack connection, tune the TV to its video input.
3 Press CH A for English
on-screen displays.
SELECT LANGUAGE
PUSH VCA CH
A4: ENGLISH
Or, press CH V for Spanish
on-screen displays.
Or, press VCR/TV for French
on-screen displays.
* You can also set the language using the buttons on the VCR.
* If the wrong language is set, see the "Reset all VCR Memory
Functions" section on page 5.
* The VCR should be connected to an antenna or cable box
(page 6-9).
OPRIMIR VCR CH ¥: ESPANOL
APP. VCR/TV — : FRANCAIS
Á Press AY to select your hookup, | SAETHAR me
and then press P to set.
VCRPCABLE/DSS BOX TV
VCRPTV
* If you selected "CABLE/DSS BOX VCR
PTV," continue with step 5. If not, go to
"Alternate Instructions on page 16.
SELECT: : M Bod
* If you are using the CABLE/DSS BOX»
¿ACTION KEY
VCRPTV connection method, only the
cable box output channel will be placed in memory.
D Press AV to select your cable
SELECT UE SUGHETÓ
box or DSS receiver output
l
channel number, and then
CABLE/DSS BOX OUTPUT CH
press P to enter.
* If necessary,
refer to your cable
RET C14
KEY
box m
y
END — :ACTION KEY
* If both a cable box and DSS receiver are used,
set the output channel of the DSS receiver.
* If you are using Audio/Video jack
connections to your cable box, select and
set "VIDEO OUT" as the output channel.
6 Press AV to select your cable
:
box or DSS receiver code number,|
fErERRING
TO MANDAL
and then press > to enter.
m
é
a
j
Using AW4b
keys
(Refer to the list on page 13.)
When a menu screen is displayed,
4
»
* If your cable box or DSS receiver
BENE.
the PLAY, STOP, REWIND, and FF
doesn't have a remote control,
END — :ACTION KEY
buttons on the remote control function
Y
select "NO REMOTE." Then, go to
as AV«4» only. Use the buttons on the VCR for
Alternate Instructions on page 16.
play, stop, rewind, and fast forward functions.
* This determines whether the VCR will
When a program screen is displayed, the REC, FF,
control your cable box or DSS receiver.
REW, and PLAY buttons on the remote control and
the VCR function as AW
only. (See Timer
Recording Using VCR Buttons on page 23.)
14
Advertisement
Table of Contents
