Table of Contents
Advertisement
fg
VCR Plus+ Programming
1 Press PROG to display the
Z
"SET PROGRAM" screen.
TT
Check list before you begin.
VOR Pi.
fis
PROGRAM," and then press >
ine ace tee
to display the "VCR Plus+" screen.
END
:PROG KEY
3 Press the NUMBERED keys to
a
enter the PlusCode number.
ENTER PLUSCODE NUMBER
* Refer to your local TV listings.
123456
USING 0-9 KEYS
To Make Corrections
BACKSPACE : 4 KEY
Press € repeatedly to delete the
A
PlusCode number. Then, enter the correct number.
4 Press PROG to lock in your program.
6 Press AV and P to select and
set each of the remaining items
as follows.
Remaining Items
* Category (N/A [not applicable], SPORTS,
MOVIE, COMEDY, MUSIC, DRAMA)
BE ie MEN
* Speed (SP, LP, SLP)
:PROG KEY
e If you use connection type
To Make Corrections
"A" on page
12, the
channel shown in this on-
Repeatedly press » to move the cursor
scisen display Wil aways
to the right, or dto move to the left to the — bg the cable box output
incorrect entry and make the correction.
channel number.
`
CANCEL: ADD/OLT KEY
To cancel program contents:
SELECT 1-6:4 Y KEY
Press ADD/DLT.
END
:PROG KEY
Use normal Timer Recording steps if:
8 Press PROG to complete
TURN VCR OFF
* the PlusCode for a program is not listed.
the program.
FOR TIMER RECORDING
* you anticipate the program, such as a sporting
+ If you're using a Cable Box, make sure
LEAVE CABLE BOX POWER ON
event, to run over the scheduled stop time.
that it is tuned to the desired channel
and the
power is left on for timer recording.
See page 23 to:
zx
M
* cancela
timer recording in progress.
=
-
-
* replace program contents.
* This display may differ depending
* review or clear program contents once set.
on your cable box hook-up.
Important notes when using a DSS receiver
O press POWER off to set the timer.
* When recording programs via a DSS receiver,
the DSS receiver must be left on.
* When recording programs via an antenna or
Multi Function Display
cable, the DSS receiver must be turned off.
You can obtain unlisted PlusCode numbers by calling 1 - 900 - 454 - 7587. Call costs approximately $.95
AS
per minute.
VCR PlusCodes can not be used to program the VCR to record DSS channels.
:
Y,
Avoid overlapping program times.
* An on-screen display will indicate if an invalid PlusCode number has been entered or when all timer
programs are full.
41
Og UE)
NOA
SAO
Advertisement
Table of Contents
