Panasonic Omnivision PV-8664 Operating Instructions Manual page 43

Using the Multi-Brand Control
Once the remote control has been properly set up, you can select VCR, TV, or CABLE/DSS mode
depending on which functions you wish to control.
Press VCR or TV or CABLE/DSS on the remote contro! to select the desired mode.
(See below for the controllable functions of each mode.)
NOTE:
In TV or CABLE/DSS mode, it may be necessary to press ENTER after pressing NUMBERED
keys for channel selection,
VCR Mode TV Mode
in VCR mode, the following In TV mode, the following buttons are
buttons are available. available.
VCR TV
All function buttons. POWER, INPUT, NUMBERED
TV keys, ENTER, CH UP/DOWN,
VOL UP/DOWN VOL UP/DOWN
VCR
EJECT, LIGHT, VCR/TV, PLAY,
STOP, FF, REW, PAUSE,
ZERO/ C/A SKIP, SLOW, REC,
SAP/Hi-Fi, SPEED, COUNTER
RESET, DISPLAY
CABLE/DSS Mode
In CABLE/DSS mode, the following
buttons are available.
CABLE/DSS
POWER, NUMBERED keys,
ENTER, CH UP/DOWN
IV
VOL UP/DOWN
VCR
EJECT, LIGHT, VCR/TV, PLAY,
STOP, FF, REW, PAUSE,
ZERO/ C/A SKIP, SLOW, REC,
SAP/Hi-Fi, SPEED, COUNTER
RESET, DISPLAY ;
* Some TV, Cable Box and DSS Box brands require you to turn on the power manually.
* Not all functions listed may be controlled by this remote control.
s
o
=
(D
<
O
c
e
Ru
m
g
i)