Table of Contents
Advertisement
©) Record On a Tape
*Important: If the remote control POWER, ACTION, PROG, CHA/Y, INDEX/ M/A SKIP or ADD/DLT button
does not work when pressed, press the VCR button on the remote and try the button again.
Y
check list before you begin.
O All connections are made.
(See pages 6-9.)
C VCR is plugged in.
U TV is tumed on and set to the VCR
channel (CH 3 or 4).
Multi Function Display
4
20
1 Insert a cassette with record tab.
* VCR power comes on automatically.
2 Press CH A/W* or NUMBERED
!
aor
keys to select a channel.
:
* Or, press CHANNEL A/F on the VCR.
* Holding down CH A/¥ will increase
the channel search speed.
* To record from an outside source,
press CH A/F or INPUT to select
"LINE1" or "LINE?" (see page 21).
3 Press SPEED to change the
recording speed.
+ SP = Standard Play ,
LP = Long Play
SLP z Super Long Play
(See page 5.)
Á Press REC/TIME on the remote control or VCR to
start recording.
* To edit out unwanted portions, press PAUSE to pause the
recording in progress.
To release, press PAUSE again.
(After the VCR has been in Pause mode for 5 minutes, it will
stop automatically to protect the tape and video head.)
One Touch Timer Recording (OTR)
The VCR starts recording and turns itself off at a preset time.
In step 4, press REC/TIME repeatedly to set the length of the
recording. Each press will change the stop time as shown.
C Normal Rec —»0:30 —» 1:00
4:004— 3:004—— 2:00 4— 1 E
* "TIMER" fights in the Multi Function Display.
* The remaining recording time can be displayed by pressing
DISPLAY in OTR mode.
5 Press STOP on the remote or VCR to stop recording.
Advertisement
Table of Contents
