Table of Contents
Advertisement
SAFETY INSTRUCTIONS .....................1
HEALTH & SAFETY..............................2
OPERATING INSTRUCTIONS.............2-5
SERVICE & MAINTENANCE...............5-6
SPECIFICATION...............................6-7
For your own personal protection and for the safety of those around you, please read and ensure you
fully understand the following safety information. It is the responsibility of the operator to ensure that
he/she fully understands how to operate this equipment safely. If you are unsure about the safe and
correct use of our MMD, consult your supervisor.
CAUTION: Improper maintenance can be hazardous. Read and Understand
l
Ensure, that all symbols on the machine, can always be clearly read.
l
Do not leave any tools or parts lying around on the work floor, as this can cause accidents.
l
Watch where you are going, the ground can be slippery.
l
Take care that you do not injure yourself on objects, such as scaffolding and reinforcement materials,
which can be found directly or indirectly in the working area.
l
Be careful when lifting and carrying the MMD. Do not bend forwards when picking up the apparatus,
bend you knees. Ensure that the working area is within your reach, that you do not have to bend
forward.
l
When cleaning the machine, ensure that no water or cleaning detergents get into the motor housing.
l
When the machine is not being used for longer periods of time, then it must be stored in a dry and
clean area.
l
Pay attention to your own safety and the safety of your colleagues.
l
Regular maintenance of the machine promotes safe operation.
The following safety-aspects specifically apply to those machines equipped with a petrol engine:
l
Do not use an MMD, fitted with a petrol engine, indoors or in poorly ventilated places, such as pits
etc.
l
Make sure that there is sufficient ventilation in spaces which are surrounded by walls. Never inhale
exhaust gasses, they can damage your health and that of your colleagues.
l
To avoid getting an electric shock, do not touch the high-tension cable or spark plug cap while the
engine is running.
l
Check for fuel leaks before running the machine.
l
Do wear working-gloves, safety glasses and protecting clothing during refueling.
l
Make sure that there is sufficient ventilation during refueling.
l
Refueling is only allowed after the engine has been cooled off sufficiently.
l
Refueling, while the engine is hot, might lead to a very dangerous situation. It is strictly forbidden to
refuel:
·In the direct vicinity of open fire or other flammable materials,
·While smoking cigarettes etc.
·In explosion endangered spaces.
CONTENTS
SAFETY INSTRUCTIONS
this section before you perform any maintenance, service or repairs.
TROUBLE SHOOTING GUIDE...............7
WARRANTY ......................................7
MAINTENANCE RECORD....................8
EC DECLARATION..............................9
1
Advertisement
Table of Contents
