Toshiba NB205 Series User Manual page 51

■
The USB Sleep and Charge function only works for compatible ports.
This function is disabled in the default setting. To enable it, you must
change [Disabled] to [Enabled] in the BIOS Setup Menu.
■
When USB Sleep and Charge function is set to [Enabled] in BIOS
Setup Menu, USB bus power (DC5V) will be supplied to compatible
ports even when the power of the computer is turned OFF.
USB bus power (DC5V) is similarly supplied to the external devices
which are connected to the compatible ports. However, some external
devices cannot be charged solely by supplying USB bus power
(DC5V).
As for the specifications of the external devices, please contact the
device manufacturer or check the specifications of the external devices
thoroughly before use.
■
Using the USB sleep and charge function to charge external devices
will take longer than charging the devices with their own chargers.
■ If external devices are connected to compatible ports when the AC
adaptor is not connected to the computer, the battery of the computer
will be depleted even when the power of the computer is turned OFF.
As such, we recommend that you connect the AC adaptor to the
computer when using the USB sleep and charge function.
■
External devices connected to the USB bus power (DC5V) function that
interfaces with the power ON/OFF of the computer may always be in
an operational state.
■
When there is a current overflow of the external devices connected to
the compatible ports, USB bus power (DC5V) supply may be stopped
for safety reasons.
Metal paper clips or hair pins/clips will generate heat if they come into
contact with USB ports. Do not allow USB ports to come into contact with
metal products, for example when carrying the computer in your bag.
How to enable/disable USB sleep and charge function
You can set enable/disable USB sleep and charge function in BIOS Setup
Menu. Please refer to the USB Sleep and Charge function in Chapter 7.
TOSHIBA Disc Creator
You can use TOSHIBA Disc Creator when you connect External ODD.
Please be aware of the following limitations when you use the TOSHIBA
Disc Creator:
■
DVD Video cannot be created using TOSHIBA Disc Creator.
■
DVD Audio cannot be created using TOSHIBA Disc Creator.
■
You cannot use TOSHIBA Disc Creator's 'Audio CD for Car or Home
CD Player' function to record music to DVD-R, DVD-R (Dual Layer),
DVD-RW, DVD+R, DVD+R (Double Layer) or DVD+RW media.
User's Manual
Operating Basics
4-3