Toshiba NB205 Series User Manual page 91

3. Turn the computer upside down and remove one screw securing the
RAM door.
1. RAM door
4. Align the notch of the memory module with that of the memory module
slot and gently insert the module into the slot at about a 45 degree
angle before holding it down until the latches on either side snap into
place.
■
Align the grooves along the edges of the memory module with the
locking tabs on the connector and insert the memory module into the
connector firmly - if you find it difficult to install the memory module,
gently prise the locking tabs outwards using the tip of your finger.
Please also ensure that you hold the memory module along its left and
right hand edges - the edges with the grooves in.
User's Manual
Figure 8-2 Removing the memory module cover
Optional Devices
1
8-5