2. Turn the computer upside down and remove the battery pack (refer to
Chapter 6,
3. Remove one screw securing the RAM door.
4. Lift off the RAM door.
5. Push the latches outward and the memory module will pop up.
6. Grasp the memory module by the sides and pull it out.
7. Seat the RAM door in place and secure it with one screw.
8. Install the battery pack - refer to
Chapter 6,
9. Turn your computer over.
Battery Packs
You can increase the portability of the computer with additional battery
packs so that, if you're away from an AC power source and your battery
runs low, you can replace it with a freshly charged battery. Please refer to
Chapter 6,
Universal AC Adaptor
If you frequently use your computer at more than one site, it may be
convenient to purchase an additional AC adaptor to be kept at each site in
order to remove the need to always carry the adaptor with you.
USB floppy diskette drive
The 3 1/2" external FDD drive module can be connected to the USB port.
User's Manual
Power and Power-up
Power and Power-up
Power and Power-up Modes
Modes.)
Replacing the battery pack
Modes, if required.
for further information.
Optional Devices
section in
8-7