Clevo ITAUTEC W244HUQ Series Service Manual page 42

Disassembly
4. Disconnect the keyboard ribbon cable
Figure 14
5. Carefully lift up the keyboard
Keyboard Removal
(cont'd)
c.
c. Carefully lift the key-
board up and disconnect
the keyboard ribbon ca-
ble from the locking col-
lar socket.
d. Remove the keyboard.

Re-Inserting the
Keyboard
When re-inserting the
keyboard firstly align the
four keyboard tabs at
the bottom (Figure 14d)
at the bottom of the key-
board with the slots in
the case.

6. Keyboard
2 - 18 Removing the Keyboard
from the locking collar socket
5
(Figure 13d) off the computer.
4
5
6
(Figure 13c)
6
d.
4
Keyboard Tabs