Clevo ITAUTEC W244HUQ Series Service Manual page 37

5. Turn the release latch towards the unlock symbol
5
6. Carefully (it may be hot) lift the CPU
7. Reverse the process to install a new CPU.
8. When re-inserting the CPU, pay careful attention to the pin alignment, it will fit only one way (DO NOT FORCE IT!).
c.
5
d.
to release the CPU
up and out of the socket
6
Unlock
6
(Figure 9d).
(Figure 9e).
5
Lock

Caution
The heat sink, and CPU area in
general, contains parts which are
subject to high temperatures. Allow
the area time to cool before remov-
ing these parts.
Removing and Installing a Processor 2 - 13
Disassembly
Figure 9
Processor Removal
(cont'd)
c. Turn the release latch to
unlock the CPU.
d. Lift the CPU out of the
socket.

6. CPU