Restoring In Gaia Clish - Check Point QUANTUM FORCE 19000 Getting Started Manual

6. Connect to the appliance.
7. Reboot or turn on the appliance.
The appliance initializes and status messages appear in the terminal emulation program.
8. When the message "Press any key to see the boot menu" appears, you have
approximately four seconds to hit any key to activate the Boot menu.
9. From the Boot menu, select the relevant Reset to factory defaults image.
10. Press Enter.
The appliance initializes and status messages appear in the terminal emulation program.

Restoring in Gaia Clish

To restore the appliance in Gaia Clish:
1. Connect to the command line on the appliance.
2. Log in to Gaia Clish.
3. Run:
set fcd revert<SPACE><TAB>
set fcd revert <Name of Default Image>
4. Follow the instructions on the screen.
5. Reboot the appliance:
reboot
Quantum Force 19000 and 29000 Appliances Getting Started Guide | 61
Restoring Factory Defaults