1. Safety Information 2. Introduction 1. Safety Information Read the following safety information carefully before attempting to operate or service the meter. Use the meter only as speci ed in this manual ; otherwise, the protection provided by the meter may be impaired. Environment Conditions: Altitude up to 2000 meters •...
3. Precautions On Handling 4. Maintenance 3. Precautions on handling Operating carefully, and do not drop the meter or hit it with a hard object. Avoid using the meter in a dirty, dusty, or salt-air area or where there are corrosive gases.
5. Symbol Definition & Button Location 5.1. LCD Display: Auto power o indicator Maximum value indicator Battery capacity indicator Value hold indicator Range indicator Measuring value Minimum value indicator Unit indicator...
5. Symbol Definition & Button Location 5.2. Name of Parts & Position: Operation Press the power button to turn on the power. Notice that covering the light-detecting surface with the cap. “CAP-“ will auto-appear on the LCD display. After “CAL-” appears, the meter enters the automatic zero adjustment. When automatic zero adjustment is completed, “CAL-”...
Page 7
5. Symbol Definition & Button Location 1. Sensor Cap: This parts is to protect the sensor from scratching and create complete dark environment for the meter to perform dark current calibration. During power on process, this cover should be set properly on the sensor otherwise an error message will be shown on the LCD.
Page 8
5. Symbol Definition & Button Location It can be also detached • from the meter to measure in distance, which creates more exibility. 3. LCD Display: 6 1/2" large size back light LCD display. 4. Power button: Press button to turn on the meter and it will automatically turn itself o 30 minutes after its last key operation.
Page 9
5. Symbol Definition & Button Location 6. HOLD button: The user may hold the present reading and keep it on the LCD display by pressing the button. To release the held data operation, press the button again. 7. Range selector button: The user may use the button to select the preferred measuring range or automatically selected by the meter.
7. Specifications 0.0 to 199.9/1999/19990/199900 lx Measuring Level 0.0 to 19.9/199.9/1999/19990 fc Range Automatic or manual selection of range Resolution 0.1 ~ 100 lx, 0.1 ~ 10 fc ±3% (Calibrated to standard incandescent Accuracy lamp 2856°K) 8% other visible light source Angle Deviation 10°...
Page 13
CUSTOMER SERVICE INQUIRIES Your emails are important to us so we strive to reply all hours. In exceptional cases, inquiries and emails within we may require more time to respond. Thank you for your understanding. For more information about our products and services, please send us an email: cs@perfectprime.com For B2B or project-based application, please send an email:...