Godox TT685II-N User Manual page 25

Setting <M> Flash Mode
You can directly operate the Receiver unit to manually set the manual flash or
stroboscopic flash.
1. Setting the Receiver unit.
2. Setting flash mode to <M>
Press <MODE> button so that <M> is displayed.
•
Set the manual flash output.
•
RPT: Wireless Flash Shooting with Manual Flash
1. Setting <RPTI> Stroboscopic flash
Press <MODE> button so that <RPT> is displayed.
•
Setting the stroboscopic flash.
•
The Reason & Solution of Not Triggering in Godox 2.4G Wireless
1. Disturbed by the 2.4G signal in outer environment (e.g. wireless base
station, 2.4G wifi router, Bluetooth, etc.)
To adjust the channel CH setting on the flash trigger (add 10+ channels) and use
•
the channel which is not disturbed. Or turn off the other 2.4G equipment in
working.
2. Please make sure that whether the flash has finished its recycle or caught
up with the continuous shooting speed or not (the flash ready indicator is
lighten) and the flash is not under the state of over-heat protection or other
abnormal situation.
25