RPT: Stroboscopic Flash
With stroboscopic flash, a rapid series of flashes is fired. It can be used to capture
multiple images of a moving subject in single photograph.
You can set the firing frequency (number of flashes per sec. expressed as Hz), the
number of flashes, and the flash output.
Press <MODE> button so that <
Set the flash frequency and flash times.
Press the Function Button 2 <Times> to select the flash times. Turn the Select Dial
•
to set the number.
Press the Function Button 3 <Hz> to select the flash frequency. Turn the Select
•
Dial to set the number.
Turn the Select Dial to choose desired flash output. After you finish the setting,
•
press Set Button and all the settings will be displayed.
> is displayed.
16