Connector Interfaces - Keysight 81940A User Manual

2 Accessories

Connector Interfaces

28
The following connector interfaces are available for these Tunable Laser
Source Family:
Option 071:
Straight Contact Connectors
If you want to use straight connectors (such as FC/PC/SPC, E-2000,
SC/PC/SPC, DIN 47256 or ST) to connect to the instrument, you must do
the following:
1 Attach your connector interface to the interface adapter.
2 See Table 2
3 Connect your cable.
Table 3
Description
FC/PC/SPC
E-2000
SC/APC/SPC
DIN 47256 / 4108.6
ST
Option 072:
Angled Contact Connectors
If you want to use angled connectors (such as E-2000 APC, SC/APC,
FC/APC or DIN 4108.6/4108.6) to connect to the instrument, you must do
the following:
1 Attach your connector interface to the interface adapter.
2 See Table 3
3 Connect your cable.
Keysight 81940A, 44A, 49A, 80A & 89A Compact TLS Modules User's Guide
on page 27 for a list of the available connector interfaces.
Angled Contact Connector Interfaces
Model Number
Keysight 81000 FI
Keysight 81000 HI
Keysight 81000 KI
Keysight 81000 SI
Keysight 81000 VI
on page 28 for a list of the available connector interfaces.