Table of Contents

Advertisement

Available languages

Available languages

may cause personal injury or equipment damage.

Safety Precautions

●The machine can be used in the range of -10°C-40°C.
●When using the machine, all spare parts must be installed.
●Correctly connect the wire harnesses and cables of the handling machine; prevent
wrong connection.
●Lubricating oil must strictly use the specified grades and must be clean!
●Before starting the transporter, please place the speed control switch in the proper
position! After pressing the clutch handle, slowly turn on the speed control switch to the
required speed.
●Be careful when handling the machine and hurt people! When starting the machine,
non-operators should not stand around the handling machine!
●Before shifting gears, the clutch must be disconnected (release the clutch handle), and
then shift gears after the carrier stops!
●It is strictly forbidden to modify the appearance or structure of the machine. Illegal
◇Due to the continuous improvement of models, the photos in the book may be different
modification may cause damage to the machine and personal injury or death.
from the actual products.
Chain Maintenance Precautions
1. It is strictly forbidden to replace or maintain the chain of the transporter on the ramp;
2. The engine must be turned off;
3. The cargo box must be removed before replacing or maintaining the chain;
4. After the maintenance of the chain is completed, the chain guard must be replaced
before the machine can continue to be used.
instructions, it can operate safely and reliably according
to the design. Before operating the transporter, please
SAFETY INFORMATIONS
read and understand this manual carefully, otherwise it
E NGLISH
E NGLIS H
23
25
4

Advertisement

Table of Contents
loading

This manual is also suitable for:

65920

Table of Contents