Parts And Components - cecotec Conga Flash Connected Titanium Instruction Manual

ENGLISH

1. PARTS AND COMPONENTS

The graphics in this manual are schematic representations and may not exactly match the
product.
Fig. 1
1. Start/Pause button
2. Back home button
Back home button
By pressing this button or selecting it on the app, the robot will automatically go to the
charging base.
Indicator light
- Steady orange light: low battery/back home mode.
- Flashing orange light: charging.
- Steady blue light: fully charged/standby mode/cleaning.
- Oscillating/steady red light: error.
Start/Pause button
- Hold down this button to turn the robot on or off.
- Press it to start cleaning too.
3. Anti-collision sensor. Fig. 2
Fig. 3
4. Free-fall sensors
5. Driving wheels
6. Power switch
7. Charging terminals
8. Omnidirectional wheel
9. Side brushes
10. Battery
11. Mixed tank
12. Silicone brush
Charging base. Fig. 4
1. Charge indicator
2. Remote control slot for compatible models
3. Signal transmitter
4. Charging terminals
40