MSI Wind Board D410 Manual page 16

Hide thumbs Also See for Wind Board D410:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
MS-7618 Mainboard
MS-7618 Mainboard
Installing Memory Modules
Installing Memory Modules
1.
The memory module has only one notch on the center and will only fi t in the right
orientation.
2.
Insert the memory module vertically into the DIMM slot. Then push it in until the
golden fi nger on the memory module is deeply inserted in the DIMM slot. The plastic
clip at each side of the DIMM slot will automatically close when the memory module
is properly seated.
3.
Manually check if the memory module has been locked in place by the DIMM slot
clips at the sides.
Important
Important
You can barely see the golden fi nger if the memory module is properly inserted in the
DIMM slot.
En-6
Notch
Volt

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wind board d510Ms-7618

Table of Contents