Connectors - MSI Wind Board D410 Manual

C C
ONNECTORS ONNECTORS
Serial ATA Connector: SATA1~2 Serial ATA Connector: SATA1~2
This connector is a high-speed Serial ATA interface port. Each connector can connect
to one Serial ATA device.
Important Important
Please do not fold the Serial ATA cable into 90-degree angle. Otherwise, data loss may
occur during transmission.
Chassis Intrusion Connector: JCI1 Chassis Intrusion Connector: JCI1
This connector connects to the chassis intrusion switch cable. If the chassis is opened,
the chassis intrusion mechanism will be activated. The system will record this status
and show a warning message on the screen. To clear the warning, you must enter the
BIOS utility and clear the record.
English
En-9