Memory - MSI Wind Board D410 Manual

M M
EMORY EMORY
These DIMM slots are used for installing memory modules. For more information on
compatible components, please visit http://www.msi.com/index.php?func=testreport
DDR2 DDR2
240-pin, 1.8V 240-pin, 1.8V
Memory Population Rule Memory Population Rule
Please refer to the following illustrations for memory population rules.
1 1
2 2
Important Important
DDR2 memory modules are not interchangeable with DDR and the DDR2 standard
•
is not backwards compatible. You should always install DDR2 memory modules in
the DDR2 DIMM slots.
• To enable successful system boot-up, always insert the memory modules into the
DIMM1 fi rst. DIMM1 fi rst
• Due to the chipset resource deployment, the system density will only be detected up
to 3+GB (not full 4GB) when each DIMM is installed with a 2GB memory module.
64x2=128 pin 64x2=128 pin 56x2=112 pin 56x2=112 pin
DIMM1
DIMM2
DIMM1
DIMM2
Installed
Empty
English
En-5