Special Price Ending Time Setup - LG F1069FD2P Owner's Manual

46 46
PROGRAMMING MODE - SETUP MODE PROGRAMMING MODE - SETUP MODE

14. Special price ending time setup

Entering setup
mode.
You will see LqC1
NOTE
• (regular priced dryer cycle time) is not available in washer.
• (special priced dryer cycle time) is not available in washer.
NOTE
• When setting up a special price period, the ending time must be later than the beginning time.
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display previous Special Price ending time.
Press Warm(+) or Cold(-) button to select time between
1 and 24 .
Press the Start button.
The machine sets up the special price ending time, then
advances to the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
Button Display
appears
appears