Table of Contents
Advertisement
44
PROGRAMMING MODE - SETUP MODE
13. Special price ending time setup
Entering set up
mode.
You will see LqC1
NOTE
•
(regular priced dryer cycle time) is not available in washer.
•
(special priced dryer cycle time) is not available in washer.
NOTE
• When setting up a special price period, the ending time must be later than the beginning time.
• This function is not applied for opl type.
Press the 90°C (194°F) button.
Press the 75°C (167°F) or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Press the 75°C (167°F)or the 60°C (140°F) button until
appears in the display.
Press the Start button.
Display previous Special Price ending time.
Press 75°C (167°F)(+) or 60°C (140°F)(-) button to select
time between 1 and 24.
Press the Start button.
The machine sets up the special price ending time, then
advances to the next process automatically.
If this function is restricted originally in program,
You can move to the next step by pushing the 60°C
(140°F) button.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Coin/OPL type - Push the 90°C (194°F) button
twice.
Button
Display
Advertisement
Table of Contents
