Twin Spray Setup - LG F1069FD2P Owner's Manual

42 42
PROGRAMMING MODE - SETUP MODE PROGRAMMING MODE - SETUP MODE

11-6. Twin spray setup

Entering setup
mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press the Warm or the Cold button until
in the display.
Press the Start button.
Display .
Press the Warm or the Cold button until
in the display.
Press the Start button.
Press Warm or Cold button and then select
or
.
Disable
Enable
Press the Start button.
The machine sets up the pre-wash, then advances to
the next process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready
mode.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
Button Display
appears
appears
appears
One or the other
will display.