Table of Contents
Advertisement
14. Special price ending time setup
Entering set up mode.
You will see LqC1
Press the Hot button.
Press the Warm or the Cold button until
Press the Start button.
Press the Warm or the Cold button until
Press the Start button.
Display previous Special Price ending time.
Press Warm(+) or Cold(-) button to select time between 1 and 24 .
Press the Start button.
The machine sets up the special price ending time, then advances to the next
process automatically.
1. Continue to set up the next mode.
2. Stop the change of setup value and go back to ready mode.
NOTE
•
(regular priced dryer cycle time) is not available in washer.
•
(special priced dryer cycle time) is not available in washer.
NOTE
• When setting up a special price period, the ending time must be later than the beginning time.
• Coin type - Turn on/off toggle switch.
• Card type - Pull the service card.
• OPL type - Push the Hot button twice.
PROGRAMMING MODE - SETUP MODE
Button
appears in the display.
appears in the display.
45
Display
Advertisement
Table of Contents
