Table of Contents
Advertisement
Hooking Up the System
You can connect the player with analog or digital signal depending on your
amplifier or D/A converter.
Before you begin, remember the following;
* Turn off the power of each unit before making connections.
* Connect the AC power cord last.
* Be sure to insert the plugs firmly into the jacks. Loose connection may cause hum and noise.
* Leave a little slack in the connecting cord to allow for inadvertent shock or vibration.
Connecting an Amplifier Directly
FIXED LINE OUT
CDP-X229ES
DIGITAL OUT
When connecting to an amplifier
or D/A converter with OPTICAL
bE
IN, use DIGITAL OUT
COP-X339ES
{
eo
|" |
n
=»
=
PTET
tone of
a
:
J
=
the cap.
a
'iat
—
to an AC
a ma
FIXED LINE OUT
> outlet
QS
Plug in firmly.
x
SPEAKER
Amplifier
Speaker system
Cr
CT
-»
to a wall outlet
CD
Note on DIGITAL OUT (OPTICAL)
When connecting with DIGITAL OUT (OPTICAL), use the
POC-15 audio optical connecting cord (not supplied).
Please note that when the digital out is connected, fade
out, fade in, time fade and level file functions cannot be
used.
Note on LINE OUT
FIXED: The output level is fixed.
VARIABLE: The output level can be adjusted with the LINE
OUT/PHONE LEVEL or LINE OUT LEVEL on the
remote commander.
* Connect your system to the VARIABLE output when
using level file.
¢{f the LINE OUT/PHONE LEVEL is adjusted while
recording, the recording level be changed even when
it is preset on the tape deck.
7
Advertisement
Table of Contents
