Table of Contents
Advertisement
4
Program the selections for side B.
Repeat step 2.
5 Press >:
The selections for side A starts playing.
To play the selections for side B
When the selections for side A are played, the player will
pause. Set the tape to the beginning of side B ("B" lights
up.), then press ® or IE
When the program being played is on side A, ao appears.
When it is on side B, [ac] appears.
To stop playing
Press
You can play the same program repeatedly as long as you
do not cancel program play or erase the program.
To cancel program play
Press CONTINUE and return to the continuous playing
mode.
The program will be erased.
To erase the entire program
Press Ml once during stop; twice during play.
The program is also erased when you turn off the player.
To check your program
Press CHECK. The first selection in the program will be
displayed.
Each time you press CHECK, the next selection in the
program will be displayed. When CHECK is pressed after
the last selection, ""- END -" appears for 1 second and
then the display returns to the initial display.
a
When the program being checked in on side A, [2]
appears. When it is on side B, {as} appears.
o Change Your Program
For operation, see page 18.
When you use the auto space function
All the blank spaces between selections, whether short or
long, will automatically be set uniformly to 3 seconds.
Therefore, playing time displayed for each selection will
include additional 3 seconds. (page 29)
ad
" is displayed instead of the actual time
- You have programed a selection number over 24.
- The total time is exceeded 100 minutes.
To check the remaining time
Press TIME/MEMO once to see the remaining time of the selection being
played; twice to see the total remaining time; once more to return to the
initial display.
If you have inserted a pause, the display shows the total remaining time until
the pause.
Your program is erased when:
* You change the continuous play mode.
* You turn off the power during program play.
23
Advertisement
Table of Contents
